膜結構工程安裝注意那些事項，今天哈瓦疊膜結構工程安裝公司里工程師整理了一下，供大家參考。
1、必須保證同一直線的邊界工作點為其他剛性邊界。 因為是組件本身的根，所以有一定的尺度空間。 根據實際情況改變膜的工作點或保持膜的工作點不變。
1. The boundary working points of the same line must be guaranteed to be other rigid boundaries. Because it is the root of the component itself, it has a certain scale space. Change the working point of the membrane or keep it unchanged according to the actual situation.
2、膜材料的利用率、生產工作等。 所需要的只是合規計算的模型。 現場拼接的處理不容易漏氣，所以一般比較適合現場的脊柱關節。
2, membrane material utilization rate, production work, etc. All that is required is a model for compliance calculation. The treatment of field splicing is not easy to leak, so it is generally suitable for the field of spinal joints.
3、在現場拼接時，一定要注意細節，保證膜結構工程不漏水，這也是提升用戶體驗必須要做的工作。
3, in the field of splicing, we must pay attention to the details, to ensure that the membrane structural engineering does not leak, which is also to improve the user experience must do.
4、另一個是膜結構工程使用一段時間后，有專業的維修工作，所以膜結構的使用壽命可以大大延長。
4, the other is the membrane structure engineering after a period of time, there are professional maintenance work, so the service life of the membrane structure can be greatly extended.
5、在膜材與硬邊界的連接點處，為方便安裝，應考慮特殊補償值。
5. In order to facilitate installation, special compensation value should be considered at the connection point of membrane material and hard boundary.
6、膜的寬度是充分利用膜的材料，考慮邊界重疊長度、預應力膨脹等因素來補償邊界，減小膜將試圖接近膜的膜的寬度 材料，以提高膜材料的利用率。
6, the width of the membrane is to make full use of the membrane material, consider the overlapping length of the boundary, prestressed expansion and other factors to compensate the boundary, reduce the membrane will try to approach the membrane of the membrane width material, in order to improve the utilization rate of membrane materials.
真正好的膜材料的價格也會非常高，所以一般來說如果能大大提高膜材料的利用率，就會大大節省用戶的成本。
The price of really good membrane materials will be very high, so generally speaking, if you can greatly improve the utilization rate of membrane materials, it will greatly save the cost of users.
